3% Off All Online Orders Over $100.00
Location Currently Shopping: Anchorage, AK Branch
Loctite® 209826 LOC 98733

Loctite® 209826

Loctite® PC 7227™ Light Yellow/White Ceramic-Reinforced Epoxy Kit, 2 lb Can

Add To Favorites
  1. pin-int

Loctite® Ceramic-Reinforced Epoxy Kit, Series: PC 7227™, Container Size: 2 lb, Container Type: Can, Liquid Part A, Paste Part B and Part C, Light Yellow/White, Ammoniacal Part A, Epoxy Mild Petroleum Part B and Part C, Epoxy Base, Composition: Part A: Benzyl Alcohol, Formaldehyde, Polymer with Benzenamine, Hydrogenated, Diethylenetriamine, Salicylic Acid, 4,4'-Methylenebis(cyclohexylamine), 4,4'-Isopropylidenediphenol, Part B and Part C: Silicon Carbide, Epichlorohydrin-4,4'-isopropylidene Diphenol Resin, Aluminum Oxide - Non-Fibrous Form, Cristobalite, Curing Time: 7 days, Specific Gravity: 1.061 Part A, 1.743 Part B and Part C, Flash Point: >199.4 deg F, Mixing Ratio: 2.75:1, VOC Content: <1 g/L, 68 - 86 deg F

Base Type      :      Epoxy
Color      :      Light Yellow/White
Composition      :      Part A: Benzyl Alcohol, Formaldehyde, Polymer with Benzenamine, Hydrogenated, Diethylenetriamine, Salicylic Acid, 4,4'-Methylenebis(cyclohexylamine), 4,4'-Isopropylidenediphenol, Part B and Part C: Silicon Carbide, Epichlorohydrin-4,4'-isopropylidene Diphenol Resin, Aluminum Oxide - Non-Fibrous Form, Cristobalite
Container Size      :      2 lb
Container Type      :      Can
Curing Time      :      7 days
Flash Point      :      >199.4 deg F
Form      :      Liquid Part A, Paste Part B and Part C
Mixing Ratio      :      2.75:1
Odor/Scent      :      Ammoniacal Part A, Epoxy Mild Petroleum Part B and Part C
Product Type      :      Epoxy Kit
Series      :      PC 7227™
Specific Gravity      :      1.061 Part A, 1.743 Part B and Part C
Temperature Rating      :      68 - 86 deg F
VOC Content      :      <1 g/L

Loctite® PC 7227™ is a 2-part, gray, flowable, ultra smooth, ceramic-reinforced epoxy kit providing a high gloss, low friction coating. Typically used to provide a smooth, protective abrasion resistant coating and for repairing heat exchangers and condensers, lining tanks and chutes, resurfacing and repairing rudders and pintel housings and repairing cooling pump impellers and butterfly valves.

  • Ceramic and silicon carbide-filled to provide maximum protection
  • Ultra smooth brushable consistency
  • Kit which is easy to mix and use
  • Reduces downtime
  • Superior adhesion - forms a solid bond
  • Designed to protect against turbulence and abrasion under typical dry service temperatures of -20.2 to 199.4 deg F
  • Used by itself, it is recommended for sealing and protecting equipment from corrosion and wear
  • Also works as a top coat over Loctite® Nordbak® wearing compounds for applications requiring surface rebuilding and lasting protection

Applications: For repairing heat exchangers and condensers, lining tanks and chutes, resurfacing and repairing rudders and pintel housings and repairing cooling pump impellers and butterfly valves

  • pdfCut sheet https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Loctite_209826_SS.pdf
  • pdfSDS 1 https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Loctite_209826_SDS_1.pdf
  • pdfSDS https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Loctite_209826_SDS.pdf

Similar items