3% Off All Online Orders Over $100.00

Loctite® 2096064

Loctite® 518™ Series 2096064 Gasket Eliminator Sealant, Liquid Gel, Red, Mild, 4 hr Curing, 50 mL, Tube

  • Manufacturer: Henkel
  • Brand: Loctite®
  • ARGPN: LOC 2096064
  • MPN: 2096064
  • ARG Industrial Available for delivery: loading
  • ARG Industrial Available for pickup at Anchorage, AK Branch: loading
  • Available for Henkel factory-direct delivery: loading
  • loading
  • Add to cart
  1. pin-int

Loctite® 518™ is a medium strength, general-purpose gasketing product with excellent contamination tolerance. Ideal for use on casted iron, steel and aluminum flanges. Loctite® 518™ cures when confined in the absence of air between close fitting metal surfaces. It is an anaerobic gasketing material designed for use on rigid iron, aluminum and steel flanged mating surfaces. Loctite® 518™ fills gaps up to 0.25 mm and forms a flexible, chemical-resistant seal that will not tear or decay. Parts disassemble easily, even after extended service. Typical applications include sealing close fitting joints between rigid metal faces and flanges. It is also used as a formed in-place gasket on rigid flanged connections.

Loctite® Gasket Eliminator Sealant, Series: 518™ Series, 50 mL Net Content, Tube Container, Composition: Toluene Diisocyanate, Liquid Gel Form, Red, Mild Odor/Scent, 4 hr Curing Time, 25 min Setting, 1.1 Specific Gravity, 4.28 g/L VOC, 500000 to 1000000 mPa-s Viscosity, Applicable Materials: Aluminum, -65 to 300 deg F, Additional Information: Acrylic Base

Additional Information      :      Acrylic Base
Applicable Materials      :      Aluminum
Base Type      :      Acrylic
Color      :      Red
Composition      :      Toluene Diisocyanate
Container Size      :      50 mL
Container Type      :      Tube
Curing Time      :      4 hr
Flash Point      :      >212 deg F
Form      :      Liquid Gel
Net Content      :      50 mL
Odor/Scent      :      Mild
Product Type      :      Gasket Eliminator Sealant
Series      :      518™ Series
Setting Time      :      25 min
Specific Gravity      :      1.1
Temperature Rating      :      -65 to 300 deg F
VOC Content      :      4.28 g/L
Viscosity      :      500000 to 1000000 mPa-s
  • Semi-flexible, medium strength anaerobic flange gasket
  • Easy to automate
  • Cures through minor surface contamination
  • Adapts to flange surface irregularities and gaps up to 0.25 mm
  • Gel-type consistency
  • Seals instantly against low pressure
  • Reduces inventory costs, no need for large inventory of cut gaskets
  • Resists high-pressure when fully cured
  • No compression set or misaligned gasket
  • pdfCut sheet https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Loctite_2096064_SS.pdf
  • pdfSDS https://www.alaskarubbergroup.com//ASSETS/DOCUMENTS/ITEMS/EN/Loctite_2096064_SDS.pdf

Similar items