Currently Shopping:
Proco 050X032442BD
Proco 442-BD Ductile Iron/PTFE Molded Expansion Joint, 5 in, 3-1/4 in L
- Manufacturer: Proco Products
- Brand: Proco
- ARGPN: 050X032442BD
- MPN: 050X032442BD
-
Available for delivery:
-
Available for pickup at
Anchorage, AK Branch:
-
Proco Molded Expansion Joint, 442-BD Series, Nominal Size: 5 in, Connection Type: Flange, 3/4 in Bolt Hole Diameter, 8-Bolt Hole, 3/4 in Thick Flange, Ductile Iron/PTFE, 84 psig, 3-1/4 in Length, 400 deg F
| Bolt Hole Diameter | : | 3/4 in |
| Connection Type | : | Flange |
| Fitting Type | : | Expansion Joint |
| Flange Thickness | : | 3/4 in |
| Length | : | 3-1/4 in |
| Material | : | Ductile Iron/PTFE |
| Nominal Size | : | 5 in |
| Number of Bolt Holes | : | 8 |
| Pressure Rating | : | 84 psig |
| Series | : | 442-BD |
| Temperature Rating | : | 400 deg F |
The Proco style 442-BD molded expansion joints can be used for corrosive applications that are found in industries such as chemical-petrochemical, industrial process piping systems, power generation plants, pulp/paper plants, water and wastewater sewage and pollution control systems. This expansion joint features two convolutions for minimal movements, higher pressure/temperature ratings and short face-to-face opening requirements. Wherever metallic joints, lap joints or PTFE and FEP lined rubber expansion joints were previously used, the Proco style 442-BD can also be used.
- Absorption of pipe-wall and fluid-borne noise
- Reduction of system stress and strain
- Isolation of mechanical vibration and motion
- Superior "Flex Life" and strength
- Tested force pound and spring rate tables
- Coated flanges and factory set limit bolts
- Chemical service capability at minimal cost
- Elimination of electrolysis
- Protection against start up and surge forces
- PTFE bellow, ductile iron flange
Catalog/Catalog Cut Sheet